(Original instructions) ENGLISH Intended use f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of Your Black & Decker drill/screwdriver has been designed electric shock.
ENGLISH (Original instructions) d. Store idle power tools out of the reach of children and Hold power tool by insulated gripping surfaces when do not allow persons unfamiliar with the power tool or performing an operation where the cutting accessory these instructions to operate the power tool.
(Original instructions) ENGLISH Vibration Chargers Use your Black & Decker charger only to charge the bat- The declared vibration emission values stated in the technical tery in the tool with which it was supplied. Other batteries data and the declaration of conformity have been measured could burst, causing personal injury and damage.
ENGLISH (Original instructions) Fitting and removing a drill bit or screwdriver bit Selecting the direction of rotation (fig. C) This tool is fitted with a keyless chuck to allow for an easy For drilling and for tightening screws, use forward (clockwise) exchange of bits.
Technical data Warning! Before performing any maintenance on the tool, remove the battery from the tool. Unplug the charger before BDH18 (H1) cleaning it. Voltage Regularly clean the ventilation slots in your tool and charger using a soft brush or dry cloth.
MACHINERY DIRECTIVE Input Voltage 100 - 240 Output Voltage 8 - 20 Current BDH18 Approx. charge time 3 - 5 Black & Decker declares that these products described under "technical data" are in compliance with: 2006/42/EC, EN 60745-1, EN 60745-2-6...
(Original instructions) ENGLISH Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
ENGLISH Do not forget to register your product! www.blackanddecker.co.uk/productregistration Register your product online at www.blackanddecker.co.uk/productregistration or send your name, surname and product code to Black & Decker in your country.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker Tel. +64 9 259 1133 5 Te Apunga Place Fax +64 9 259 1122 Mt Wellington Auckland 1060 United Kingdom Black &...