Motorola DCX3200 User Manual page 47

6 CONFIGURING THE AUDIO, VIDEO, AND CLOSED CAPTION SETTINGS
Setting Description
Audio Output The Audio Output setting allows you to specify the digital audio
format delivered over the HDMI connection by the DCX3200. Options
include Auto, L-PCM, and Pass Through. By default, the Auto option is
selected. The options are used as follows:
Note 1: Adjusting these settings could result in a loss of audio. Only a
professional installer or someone with a good working knowledge of
the digital audio formats supported by the TV and/or home theater
receiver should change this setting.
Return To Selecting this option will return you to the main User Settings menu
Main Page screen.
Restore Selecting this option will restore all of the settings on this screen
Automatic (HDMI/DVI Mode, Color Space, and Audio Output) to their default
Settings value. Use this option if audio and/or video has been lost after
adjusting these settings from their default values.
To configure the DCX3200 settings on the Additional Closed Caption
Settings menu screen:
1.
2.
3.
•
Auto designates that the DCX3200 will provide the digital
audio format specified by the connected device (TV or
home theater receiver) when that device was first
connected to the DCX3200.
•
L-PCM designates that the DCX3200 will provide all audio in
the Linear Pulse Code Modulation digital audio format. The
L-PCM format is widely supported by most HDMI
televisions and home theater receivers.
•
Pass Through designates that the DCX3200 will provide the
same digital audio format on the HDMI output as is
provided with the program being viewed at that time. For
example, if the program has a Dolby Digital soundtrack, the
DCX3200 will pass the Dolby Digital audio to the HDMI
output. This option is most useful when connecting the
DCX3200 to a home theater receiver that has HDMI
switching capability.
Power off the DCX3200 and then immediately press the
MENU key on the front panel. This will display the main User
Settings menu.
Move the cursor next to the "Closed Caption" option and
adjust this setting to "Enabled."
The option to enter the Additional Closed Caption Settings
menu is now available.
37