LABEL
Reset
Click Reset to begin configuring this screen afresh.
13.5 Configuring WWW
To change your ZyAIR's World Wide Web settings, click ADVANCED, REMOTE MANAGEMENT and
then the WWW tab. The screen appears as shown.
The following table describes the labels in this screen.
LABEL
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the ZyAIR using this
service.
Remote Management
ZyAIR Wireless Gateway Series User's Guide
Table 13-2 FTP
DESCRIPTION
Figure 13-4 WWW
Table 13-3 WWW
DESCRIPTION
13-5