ZyXEL Communications ZyAIR User Manual page 234

Wireless gateway series
Hide thumbs Also See for ZyAIR:
Table of Contents

Advertisement

FIELD
Service Type
My Login
My Password
Login Server
IP Address
Assignment
IP Address
IP Subnet Mask
Gateway IP
Address
Network Address
Translation
When you have completed this menu, press [
your configuration, or press [
If all your settings are correct your ZyAIR should connect automatically to the Internet. If the connection
fails, note the error message that you receive on the screen and take the appropriate troubleshooting steps.
Refer to the System Security chapter for the wireless LAN security setup.
Internet Access
Table 20-2 Menu 4 Internet Access Setup
This field is available if you select the Ethernet encapsulation.
Press [SPACE BAR] to select the service type then press [ENTER].
Choose a RoadRunner flavor if your ISP is using Time Warner's
RoadRunner; otherwise choose Standard. The User Name,
Password and Login Server fields are not applicable (N/A) for the
latter.
Choose from Standard, Telstra (RoadRunner Telstra or BigPond
authentication method), RR-Manager (RoadRunner Manager
authentication method) or RR-Toshiba (RoadRunner Toshiba
authentication method).
Configure the My Login and My Password fields for PPP and
PPPoE encapsulation only. Enter the login name exactly as your
ISP gives you.
Enter the password associated with the login name above.
Enter the IP address of the login server in dotted decimal notation.
SPACE BAR
Press [
] and then [ENTER] to select Static or
Dynamic address assignment.
Enter the IP address supplied by your ISP if applicable.
Your ZyAIR will automatically calculate the subnet mask based on
the IP address that you entered. Unless you are implementing
subnetting, use the subnet mask computed by the ZyAIR.
Type the IP address of the gateway. The gateway is an immediate
neighbor of your ZyAIR that will forward the packet to the
destination. On the LAN, the gateway must be a router on the same
segment as your ZyAIR.
SPACE BAR
Press [
] and then [ENTER] to select None, SUA Only
or Full Feature. Please see the NAT Chapter for more details.
ESC
] at any time to cancel.
ZyAIR Wireless Gateway Series User's Guide
DESCRIPTION
ENTER
] at the prompt "Press ENTER to Confirm..." to save
EXAMPLE
Standard
N/A
N/A
10.11.12.13
Static
10.11.12.20
SUA Only
20-3

Advertisement

Table of Contents
loading

Table of Contents