ZyXEL Communications ZyAIR User Manual page 266

ZyAIR Wireless Gateway Series User's Guide
FIELD
Incoming Incoming is a port (or a range of ports) that a server on the WAN uses when it sends out a
particular service. The ZyAIR forwards the traffic with this port (or range of ports) to the
wireless station on the LAN that requested the service.
Start Port Enter a port number or the starting port number in a range of port numbers.
End Port Enter a port number or the ending port number in a range of port numbers.
Trigger The trigger port is a port (or a range of ports) that causes (or triggers) the ZyAIR to record
the IP address of the LAN computer that sent the traffic to a server on the WAN.
Start Port Enter a port number or the starting port number in a range of port numbers.
End Port Enter a port number or the ending port number in a range of port numbers.
Press [ENTER] at the message "Press ENTER to Confirm..." to save your configuration, or press [ESC]
at any time to cancel.
23-18
Table 23-6 Menu 15.3 Trigger Port Setup
DESCRIPTION EXAMPLE
6970
7170
7070
7070
NAT