Figure 26-5 Menu 23.4 System Security : Ieee802.1X; Table 26-2 Menu 23.4 System Security : Ieee802.1X - ZyXEL Communications ZyAIR User Manual

ZyAIR Wireless Gateway Series User's Guide
Wireless Port Control= Authentication Required
ReAuthentication Timer (in second)= 1800
Idle Timeout (in second)= 3600
Authentication Databases= Local User Database Only
Dynamic WEP Key Exchange= 64-bit WEP
The following table describes the fields in this menu.
FIELD
Wireless Port Press [SPACE BAR] and select a security mode for the wireless LAN access.
Control
Select No Authentication Required to allow any clients access to your wired network
without entering usernames and passwords. This is the default setting.
Selecting Authentication Required means clients have to enter usernames and
passwords before access to the wired network is allowed.
Select No Access Allowed to block all clients access to the wired network.
ReAuthentica- Specify how often a client has to re-enter username and password to stay connected to
tion Timer the wired network.
(in seconds)
This field is activated only when you select Authentication Required in the Wireless
Port Control field. Enter a time interval between 10 and 9999 (in seconds). The default
time interval is 1800 seconds (or 30 minutes).
Idle Timeout The ZyAIR automatically disconnects a client from the wired network after a period of
inactivity. The client needs to enter the username and password again before access to
the wired network is allowed.
This field is activated only when you select Authentication Required in the Wireless
Port Control field. The default time interval is 3600 seconds (or 1 hour).
26-4
Menu 23.4 - System Security - IEEE802.1x
Press ENTER to Confirm or ESC to Cancel:

Figure 26-5 Menu 23.4 System Security : IEEE802.1x

Table 26-2 Menu 23.4 System Security : IEEE802.1x

DESCRIPTION
System Security