Presence Simulation - ABB Busch-ComfortTouch 9 Operating Instructions Manual

Operating Instructions
Busch-ComfortTouch
5.3.13

Presence simulation

The absence of the resident of the building can be realistically simulated to a great extent via the Busch-
®
ComfortTouch , for increasing the protection against unauthorised access.
The Busch-ComfortTouch
then plays these back.
Note
This function does not have a direct application page. It is deactivated / activated via the status bar
with the following icons:
Please note that you must always create a presence simulation beforehand, so that the simulation
can be played back later!
1. Open the function by pressing the icons shown above .
Additional text windows are then displayed.
2. Press "Record scene", to record a presence simulation.
3. Press "Play back scene", to play back the presence simulation recorded.
The status of the presence simulation is displayed in the status bar.
This icon indicates that presence simulation is being recorded. During recording by your Busch-ComfortTouch
presence simulation runs continuously to constantly have up-to-date information available. This is how a
typical daily routine is recorded and stored.
This icon indicates that presence simulation is being recorded. Presence simulation is activated during
prolonged absences such as holidays. Your Busch-ComfortTouch
during your absence, for example, to simulate someone's presence in the house.
Operating Instructions | 1473-1-8041
®
®
records (weekday-specific) up to 20 objects of all actions precisely to the minute and
®
switches the light and blinds on and off
Operation
®
,
— 50 —