ABB Busch-ComfortTouch 9 Operating Instructions Manual page 25

Operating Instructions
Busch-ComfortTouch
Room temperature controller (basic versions, which can be adapted further)
Climate control units can be controlled with the control element for room temperature controllers. Because such
devices have many functions, the control element displays only a small excerpt. That is why another window can
be opened in the Busch-ComfortTouch
the room temperature controller.
Note
The internal room temperature controller of the Busch-ComfortTouch
control element (see room temperature controller).
Control element Status
Room temperature
controller
Miele control elements (basic versions, which can be adapted further)
With the Miele control element you have the option of transferring information and data about kitchen appliances
from Miele to the Busch-ComfortTouch
control certain appliance functions with the Busch-ComfortTouch
This function is an option and only available with a corresponding plug-in. More detailed information is available
from your electrical installer.
Links in the floor plan
Links in the floor plan are used to jump to individual operating pages from the start page.
Control element Status
Links: Some forms are possible. They must be
– Pages created appropriately in the project planning
– Room view software of the Busch-ComfortTouch
– Web (Internet site) Please contact your electrical installer who
– Camera will set up the Busch-ComfortTouch
– News centre individually and according to your wishes.
Operating Instructions | 1473-1-8041
®
®
via the control element that displays all functions and information about
®
and to call this information up there. It is also possible to remotely
®
.
®
for you
®
is not opened via this
Function
The "RTC" (room temperature controller) version has a
push-button for opening an additional window. The button
also displays the current temperature, which the controller
regulates. The current operating mode and the mode (e.g.
"Heating") of the controller are displayed in the top part of
the control element.
®
and to implement these for KNX devices.
Function
The control element of the link can be selected within the
field. This opens the operating page which was linked.
Note
The operating page to be linked must have been
appropriately assigned in the project planning softwar of
®
the Busch-ComfortTouch . Please contact your electrical
installer who will set up the Busch-ComfortTouch
individually and according to your wishes.
Operation
®
for you
— 25 —