Chapter 5 Connection; Ethernet Port; Sfp Port; Console Port - TP-Link T3700G-28TQ Installation Manual

Jetstream stackable l3 managed switch

Hide thumbs Also See for T3700G-28TQ:

Table of Contents

Stackable L3 Managed Switch

ChaCter 3

31C

311

312

Connection

Connect the Ethernet ports of the switch to the network devices by RJ45 cable as the

following figure shown.

RJ45 Port

Connect an SFP transceiver to the SFP port . For the switch, if an RJ45 port which

is combo with SFP port has a valid link, the associated SFP port will be disabled and

cannot be used.

CLI enables you to manage the switch, thus you can load the CLI after connecting the

PCs or Terminals to the console port on the switch via the provided cable.

Connect the console port of the device with your computer by the console cable as the

following figure shown.

Figure 5-1

Connecting the RJ45 Port

Figure 5-2

Inserting the SFP Transceiver

RJ45 Cable

SFP Port

SFP Transceiver

Table of Contents