Chapter 4 Connection - TP-Link TL-SG2216 Installation Manual

Gigabit Smart Switch
rules:
The port rate of the signal lightning arrester should match the rate of the desired
port on the device. If it is not matched, this signal lighting arrester will not work.
Purchase a standard lightning arrester.
Install signal lightning arrester near the protected device and connect it to the
ground via a shorter ground cable.
Note: Signal lightning arrester is not provided with our product. If needed, please self
purchase it.
Grounding Terminal Equipotential Bonding Cable
Signal Lightning Arrester Device
Figure 3-4 Lighting Arrester Connection
Ethernet Cable