Gibson G FORCE Owner's Manual page 7

4. Wind one turn clockwise around the part of the post directly above the flange.
Wind the strings in the same direction (clockwise) as the direction of tightening the machine head cap.
5. Screw the cap on as tight as you can with your fingers, then use a penny to give an
th
additional 1/8
6. Use String Up mode (see page 11) to tune the string.
Treble Side Guitar Stringing for Gibson G FORCE
1. Remove the machine head cap.
2. Looking at the headstock from the top and with the treble strings toward the right, the machine
head's right recess should be between 1:00 and 2:00 o'clock, and the left recess between 7:00
and 8:00 o'clock.
The red line indicates a 45 degree angle.
3. Thread the string through the bridge and toward the machine head. Pull on the string to take up
any slack as you wrap it partially around the part of the post below the flange that faces away
from the guitar body.
4. Bring the string up through the recess in the flange, and wind clockwise around the part of
the post just above the flange.
7 | P a g e
turn. Do not overtighten!