Combine/Morph Tunings - Gibson G FORCE Owner's Manual

Combine/Morph Tunings

Apply selected string tunings from one tuning to a different tuning.
1. Tune to a "base" tuning preset to which you will add string tunings from a second tuning preset.
2. Press On twice, then select the second tuning preset: Up/Down buttons select the tuning preset
bank, Left/Right buttons select the tuning preset.
3. Please read this entire step before doing any of its instructions. Press and hold the Right button.
The LED will flash
Single-String Tuning mode.
4. Use the Left/Right buttons to select a string whose tuning you want to add to the base tuning.
The string LED will be red. Pluck it.
5. When the string LED turns green, select another string (see step 4) you want to add to the
tuning. If you're done, turn off the system by pressing and holding the On button.
6. You can now turn the system back on and save this as a custom tuning (see
and Custom Tuning with "Pitch Assist" Mode on page 11). Gibson recommends using "Pitch
Assist" mode when saving the morphed tuning as a custom tuning.
22 | P a g e
rapidly. While it's flashing, press Enter. Gibson G FORCE enters
Custom Tuning