Table of Contents
Advertisement
Advanced Software Functions (
Gain
Increase gain if string LEDs don't turn
in environments with high ambient noise. The default is recommended.
1. With Gibson G FORCE off, press On three times. Press the Left button twice to select
2. Press Enter twice. The Left/Right buttons select the gain amount. More lit LEDs = higher
gain/greater system sensitivity.
3. Press Enter = gain setting stored.
Note: The Calibration process (page 15) optimizes gain. Gibson strongly recommends keeping the
default Gain setting. However when tuning in loud environments, decreasing gain temporarily and
tuning in Single-String Tuning mode can improve performance.
Guitar Type
Optimize Gibson G FORCE for electric or acoustic guitar
1. With Gibson G FORCE off, press On three times. Press the Left button twice to select
2. Press Enter. Press the Left button once to select the
3. The Left/Right buttons select
4. Press Enter = guitar type setting stored.
Pitch Window
If you try to use Multi-String tuning mode but a string is considerably out of
tune, Gibson G FORCE switches automatically to Single-String Tuning mode. This
Function sets how far off pitch a string must be before Gibson G FORCE switches
to Single-String Tuning mode.
1. With Gibson G FORCE off, press On three times. Press the Left button twice to select
Press Enter.
2. Press the Left button twice to select
3. The Left/Right buttons select the pitch window. 1 lit LED = 150 cents, 2 lit LEDs = 100 cents, 3 lit
LEDs = 75 cents, 4 lit LEDs = 50 cents, 5 lit LEDs = 35 cents, all LEDs lit = 25 cents.
4. Press Enter = pitch window setting stored.
17 |
P a g e
Category)
when first plucked; decrease gain
E
for electric,
A
E
for acoustic, or
. Press Enter.
string LED. Press Enter.
D
A
E
for short scale guitars.
.
.
.
Hide quick links:
Advertisement
Table of Contents
