Appendix 4: Charging The Gibson G Force™ Battery - Gibson G FORCE Owner's Manual

Appendix 4
Changing/Charging the Gibson G FORCE™ Battery
A new or infrequently used battery could have a reduced capacity, and need recharging several times to
restore full capacity. When the battery level is low, the Gibson G FORCE BAT LED located on the
controller flashes red.
Caution!

Do not connect improperly.

Do not dispose of in fire or expose to excess heat.

Do not crush, puncture, incinerate or short circuit the external contacts.

Do not put the battery in a pocket with metal objects (keys, coins, etc.).

Never force the battery into the guitar's battery slot. It should slide in easily (see page 9).
Charging

supplied with your guitar. Other
chargers could damage the
battery, the charger, or both.

red
when the battery is charged.

the BAT LED on the controller
shines red, or when
maintain a full charge.
Battery Pack
3.7V 340mAh 1258mWh Li-Polymer
Li-Polymer Charger
Input 100-240V AC 50/60HZ
Output 4.2V – 300mA
Charger tip polarity:
27 | P a g e
Use only the charger
The charger's LED shines
when charging, and green
Charge the battery when
to