Reference Tuning; Firmware Version - Gibson G FORCE Owner's Manual

1. With Gibson G FORCE off, tune your guitar to a custom tuning.
2. Press On three times. Press Enter.
3. Press the Left button once to select the
than 3 seconds to engage Pitch Assist.
4. When a string flashes red, pluck it. (Tip: Mute a string after its string LED turns
up the process.)
5. When a string LED flashes blue, use the Left/Right buttons to select a
Enter = stores pitch-corrected tuning in the selected preset.

Reference Tuning

Tune the guitar to itself, but reference a non-standard pitch
Example: A piano is in tune with itself, but slightly flat. Tune one string to the piano, make that the
reference pitch, and the guitar will be in tune with the piano.
Note: Loading any other tuning erases the reference tuning. To save this tuning as a user tuning preset,
treat it as a Custom Tuning and follow the steps in
1. With Gibson G FORCE off, tune one string to the new reference pitch.
2. Press On three times. Press Enter.
3. Press the Left button twice to select the
4. E string flashes red. Use the Left/Right buttons to select the string you tuned to the new
reference pitch.
5. Pluck the string. When the string LED shines
6. LEDs turn off = reference tuning is complete.

Firmware Version

Display Gibson G FORCE firmware version number
1. With Gibson G FORCE off, press On three times. Press Enter.
2. Press the Left button three times to select the
3. You'll see three sequences of lit LEDs. The number of lit
digit, the number of lit
digit. All LEDs = zero. Example: 2 lit
2.3.1
4. The sequence occurs rapidly. If you need to see it again, press Enter.
12 | P a g e
Custom Tuning above. Do not use Pitch Assist.
green
blue LEDs is the second digit, and the number of lit
green
string LED, then press and hold Enter for more
blue
string LED. Press Enter.
and all others red, strum to tune the guitar.
string LED. Press Enter.
green LEDs is the version number's first
LEDS + 3 lit blue LEDs + 1 lit
green to speed
bank preset. Press
red LEDs is the third
red LED = version