Table of Contents
Advertisement
DESCRIPTION
The ice cubes maker is the result of years of experience in this field and the development of a high
technology factory.
Main Features
• Storage bin made of polyester strengthened with glass fibre or ABS
• Stock bin made of high resistance plastic materials
• Polyurethane insulation injected "IN SITU"
• Heavy duty door (pat.) except AGS 836/837/838/839 and 850/851.
• Agitator motor for continuous service
• Tough cam motor (50 Kg/cm)
• Safety device and clutch for the water pan preventing its breakage during the upward cycle, (pat.)
• Machine stoppage and water pan protection during the downward cycle, (pat.)
• The stock ice is the maximum than it could be thanks to the stop machine system.
• Low noise
• High pressure safety pressostats even in air-cooled machine.
• Large condensers (work well at high ambient temperatures; and reduce cooling water consumption in
water-cooled machines).
• Clear cubes.
• Ices Cubes can be adjusted (height and diameter).
• Easy to maintain and repair.
HOW IT WORKS
When the machine is switched on the compressor and the agitator motor start, the water entry valve opens
and allows water into the production pan up to a level where the float makes a micro-switch cut the current
to the valve and so stop water entering the tray. The compressor, controlled by capillaries produces enough
cold in the evaporator to gradually freeze the water around its "fingers".
When the ice so formed reaches the proper size the paddles of the agitator are stopped and its motor,
suspended, works the end of cycle micro-switch.
This micro-switch connects the relay that starts the cam motor. When the micro-switch has fallen, opens the
hot gas valve and stops the agitator motor. The compressor continues working for another 20", then stops,
and the agitator motor is connected. The cam motor starts to move downwards, making part of the surplus
water flow to the drain, and dropping the ice cubes, pushed by the ejection plate into the storage bin.
The pan eventually gets back to its initial position and so starts another production cycle.
Once the storage bin is full the pan stops in its downward movement as it touches the cubes, so working the
safety stop micro-switch and switching off the machine. Production will start again as soon as the cubes
which detained it move or are removed.
4
Hide quick links:
Advertisement
Table of Contents
