Water Condenser; Air Condenser; Evaporator / Water Deposit - Whirlpool AGS 836 Technical & Service Manual

Ice cube makers
Table of Contents

Advertisement

MAINTENANCE AND CLEANING PROCEDURES
WARNING: Unit should always be disconnected during maintenance/cleaning procedures.

Water Condenser

1) Disconnect machine.
2) Close water faucet.
3) Disconnect water entry/exit from condenser.
4) Prepare a solution of 50% phosphoric acid in distilled water.
5) Distribute solution through condenser. (Solution is more effective at 35°-40°C).
WARNING!
DO NOT USE HYDROCHLORIC ACID

Air Condenser

1) Disconnect machine.
2) Close water faucet.
3) Clean condenser using a vacuum cleaner, brush or low pressure air.
Removing scale (lime) from ice production mechanisms
1) Close the water inlet faucet.
2) Remove lid from top of machine by pulling upwards from the rear part of the lid. Some force is required
for this it may be better to prise it open with a flat screwdriver.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents