Whirlpool AGS 836 Technical & Service Manual page 25

PROBLEM
11) Pan does not free cubes or remains in
am intermediary position.
12) Pan goes up and down constantly.
13) The evaporator gets cold. And there is
no water in the pan.
POSSIBLE CAUSES
A) Cam motor disconnected or in bad
condition.
B) Flexible pin or cam wheel broken.
A) Agitator motor micro-switch badly
connected or faulty.
B) Security micro badly connected or
faulty.
C) Faulty rele
A) Water supply turned off.
B) Foreign bodies in water supply.
C) The buoy wrongly positioned
D) Faulty buoy micro-switch.
E) Faulty water intake electrovalve.
SOLUTION
A) y B) Connect or replace cam
motor.
ALWAYS change pin and wheel.
A) Connect or replace micro-switch.
B) Connect or replace micro-switch.
C) Replace rele.
A) Turn on.
B) Clean water entry filters.
C) Adjust buoy.
D) Replace micro-switch.
E) Replace electrovalve.
25