Advertisement
ASSEMBLY INSTRUCTIONS
1. Wash all parties in hot soapy water. Lubricate shaft with vegetable oil
and assemble as illustrated.
2. Slide body bottom into grooves on suction base. Secure body to base
with two hand-tightening screws. Insert the shaft up through the
bottom of the shaft opening, slide the spring over the shaft and attach
knob.
3. Place on a smooth counter top of table and swing the suction lever over
to the left. Make sure the rubber gasket and plastic pit container are in
position.
4. Place cherries in tray, then press sharply down on the plunger and
release. The pit is ejected into the plastic container, while the whole
seedless cherry falls into a waiting bowl.
After use, wash and dry thoroughly, lubricate shaft with vegetable oil, and
store in the box for the next use.
Advertisement
