Advertisement
Setup Instructions
Mount firmly on a sturdy table or counter top and secure with clamp
screw. See mounting example diagrams below:
Correct Mounting:
Incorrect Mounting:
Warning!
1. Never put any foreign objects into grinder. Small rocks or pieces of
metal could damage the milling cones.
2. Never use tools of any kind to tighten the adjustment knob. Only
tighten the adjustment knob by hand. Use of tools to tighten the
adjustment knob will damage the mill and void the warranty.
3. Never operate the mill if any parts are missing or damaged. Always
make sure the mill is clamped securely to a sturdy surface before
using.
2
Advertisement
