Table of Contents
Advertisement
Terminals VMT5017
Bracket for VESA standard
The stainless steel installation bracket for the VESA standard (75mm) has four drill holes.
Using this bracket, the device can be fitted to a wall or to a VESA coupler. You can set the
angle of the device towards the front or rear in several steps by loosening the self-locking
screws on both sides, in order to set up the angle of viewing.
14
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
Advertisement
Table of Contents
