Peration; Front Control Keys - ADS-tec VMT5017 User Manual

Terminals VMT5017
5 O

PERATION

5.1 F
RONT CONTROL KEYS
Depending on the equipment version of the device, an operating system (Windows CE.net,
Windows XP embedded or Windows XP Prof.) and a soft keyboard might be already
installed ex factory. The following functions are already assigned to the keys on the front
panel by a specific driver in the soft keyboard:
Note:
If the software keyboard is not installed, only the functions for display settings and
volume control are active. The controller display is not output on the display, in this
case. The functions assigned to the keys, might already be modified according to
customer specifications. Above described functions are pre-set ex works.
Pos: 21 /Datentechnik/Bedienung/Softkeyboard/Softkeyboard für OPC / CPC / OTC / VMT / STC-Serie @ 1\mod_1204714082851_681.doc @ 3403 @
© ads-tec GmbH • Raiffeisenstr.14 • 70771 Leinfelden-Echterdingen
On / Off pushbutton for the device (ATX functionality)
Level 1:
Activate and deactivate the soft keyboard for letter/character input
using the touchscreen.
Level 2:
Increase the volume with devices using a speaker/audio output.
Level 1:
Change tasks (Alt+ESC) in Windows.
Level 2:
Decrease the volume with devices using a speaker/audio output.
Level 1:
Not connected
Level 2:
Increase display brightness
Level 1:
Right mouse-key function
Level 2:
Decrease display brightness
Shift key (SHIFT) for activating the second keyboard level. This key
must be pressed simultaneously with the desired function key.
21