Software Installation; Obtaining/Installing The Driver Installer Package - ICP DAS USA PIO-821 Series User Manual

PIO-821 Series Card
45 kS/s 12-bit, 16-ch A/D, 1-ch D/A Multi-function DAQ Board

4. Software Installation

This chapter provides a detailed description of the process for installing the PIO-821 series driver
and how to verify whether the PIO-821 was properly installed. PIO-821 series card can be used on
DOS, Linux and Windows 98/ME/2000 and 32-/64-bit XP/2003/Vista/7/8 based systems, and the
drivers are fully Plug and Play (PnP) compliant for easy installation.
4.1

Obtaining/Installing the Driver Installer Package

The driver installer package for the PIO-821 series card can be found on the supplied CD-ROM, or
can be obtained from the ICP DAS FTP web site. Install the appropriate driver for your operating
system. The location and addresses are indicated in the Table4-1 and Table 4-2 below.
Table 4-1: UniDAQ Driver/SDK
Windows 2000、32/64-bit Windows XP、32/64-bit Windows 2003、
32/64-bit Windows Vista、32/64-bit Windows 7、32/64-bit Windows 2008、
OS
32/64-bit Windows 8
UniDAQ Driver/SDK (unidaq_win_setup_xxxx.exe)
Driver Name
CD:\\ NAPDOS\PCI\UniDAQ\DLL\Driver\
CD-ROM
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/dll/driver/
Web Site
For detailed information about the UniDAQ driver installation, please refer to
UniDAQ DLL Software Manual.
Installing
The user manual is contained in:
Procedure
CD:\NAPDOS\PCI\UniDAQ\Manual\
http://ftp.icpdas.com/pub/cd/iocard/pci/napdos/pci/unidaq/manual/
User Manual, Ver. 2.0, Mar. 2015, PMH-019-20, Page: 26