Software Installation
3.
ICP DAS provides following device drivers for most operation systems such as Windows
NT 4.0 and Windows 2000/XP/2003/2008/Vista32/Windows 7 (32 / 64 bits). These Windows
drivers provide full interrupt-driven, buffered I/O for each COM ports. And also supports the
Plug & Play mechanism for easy installation.
VxCard_W7_v2.08.00.exe:
This is the VXC/VEX Card driver for Windows NT 4.0, 2000/XP/2003/2008/ Vista32 and
Windows 7 (32 / 64 bits).
Note:
Please refer to "Quick Start" for getting the location of setup program on CD.
For Windows users to access COM ports, please refer to the "Serial Communications in
Win32" article for programming information. It can be found by searching on the
http://msdn.microsoft.com.
This chapter shows you the detail steps to install these drivers.
Note:
For more information about COM port number selection, please refer to Section 2.2
"COM Port Mapping & Board ID".
VXC-112(i)(A)U/142(i)AU/182i(A)U/114(iA)U/144(i)U, VEX-114(i)/144(i) , VEX-112(i)/142(i) User's Manual (Ver. 1.5
Aug.10 2012) -----21