PIO-821 Series Card
45 kS/s 12-bit, 16-ch A/D, 1-ch D/A Multi-function DAQ Board
5. Testing PISO-821 Series Card
This chapter can give you the detail steps about self-test. In this way, user can confirm that PIO-821
series card well or not. Before the self-test, you must complete the hardware and driver installation.
For detailed information about the hardware and driver installation, please refer to
Chapter 3
Hardware Installation
and
Chapter 4 Software
Installation.
5.1 Self-Test Wiring
5.1.1 DIO Test Wiring
Use the CA-2002 cable (optional) to connect the CON1 with CON2 on the PIO-821 series card.
User Manual, Ver. 2.0, Mar. 2015, PMH-019-20, Page: 31