Technical Specifications / Warranty - Russound D250LS Installation Manual

D250LS Amplifier
Continuous Output Power:
(<0.3% THD+N) @ 1kHz
Distortion THD+N:
Signal-to-Noise Ratio:
Channel Separation:
Frequency Response:
Input Sensitivity:
Input Impedance:
Voltage Gain:
Delay Time:
Input Trigger:
Output Trigger:
Power Requirements:
(Autoswitching Power Supply)
Fuse Rating:
Standby Power:
Dimensions:
Weight:
The D250LS Amplifier meets EU Standby Power Requirements
Rev. 2
50W per channel at 8 ohms
75W per channel at 4 ohms
150W at 8 ohms, 2 channels bridged
<0.3% from 20Hz to 20kHz for 50W into 8 ohms
<0.05% from 20Hz to 20kHz for 1W into 8 ohms
>112dB A-weighted
>60dB @ 1 kHz
20Hz to 20KHz +/- 0.4dB
70mV for 1W at 8 ohms
550mV for 50W at 8 ohms
47kohms Line Input
32dB
5 seconds to 5 minutes
12VDC 10kohms
12VDC 100mA max
North American and European Models:
100VAC to 240VAC 50/60Hz 2.5A
IEC 320 type connector with 3 terminal
detachable power cord
T3.15AL/250V
<0.5 Watts
8.5" W x 10.5" D x 1.75" H
(21.59 x 26.67 x 4.45 cm)
4.65 lbs. (2.1 kg)
Russound D250LS Installation Manual

TECHNICAL SPECIFICATIONS / WARRANTY

Warranty
The Russound D250LS Amplifier is fully guaranteed against all defects in materials and
workmanship for two (2) years from the date of purchase. During this period, Russound
will replace any defective parts and correct any defect in workmanship without charge
for either parts or labor.
For this warranty to apply, the unit must be installed and used according to its written
instructions. If service is necessary, it must be performed by Russound. The unit must
be returned to Russound at the owner's expense and with prior written permission.
Accidental damage and shipping damage are not considered defects, nor is damage
resulting from abuse or from servicing by an agency or person not specifically authorized
in writing by Russound.
This Warranty does not cover:
• Damage caused by abuse, accident, misuse, negligence, or improper installation or
operation
• Power surges and lightning strikes
• Normal wear and maintenance
• Products that have been altered or modified
• Any product whose identifying number, decal, serial number, etc. has been altered,
defaced or removed.
Russound sells products only through authorized Dealers and Distributors to ensure
that customers obtain proper support and service. Any Russound product purchased
from an unauthorized dealer or other source, including retailers, mail order sellers and
online sellers will not be honored or serviced under existing Russound warranty policy.
Any sale of products by an unauthorized source or other manner not authorized by
Russound shall void the warranty on the applicable product.
Damage to or destruction of components due to application of excessive power voids
the warranty on those parts. In these cases, repairs will be made on the basis of the retail
value of the parts and labor. To return for repairs, the unit must be shipped to Russound
at the owner's expense, along with a note explaining the nature of service required. Be
sure to pack the unit in a corrugated container with at least three (3) inches of resilient
material to protect the unit from damage in transit.
Before returning a unit for repair, call Russound at (603) 659-5170 for a Return
Authorization number. Write this number on the shipping label and ship to: Russound,
ATTN: Service, 5 Forbes Road, Newmarket, NH 03857
Due to continual efforts to improve product quality as new technology and techniques
become available, Russound/FMP, Inc. reserves the right to revise system specifications
without notice.
11