Locating Inputs And Outputs - Sony BRAVIA KDL-55EX500 Operating Instructions Manual

Locating Inputs and Outputs
Rear Panel
Side Panel
o
g
o
" J
. p='~!~.
0 0
~ ~1IlIIID
, =
I
I~~
ACIN
Component video provides better picture quality than the composite video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
[j]
AC IN
Connect the supplied power cord to AC IN and the nearest wall outlet.
[2]
DIGITAL AUDIO
Connects to the optical audio input of digital audio equipment that is PCMID0Iby",2
OUT (OPTICAL)
Digital compatible.
~ CABLE/
RF input that connects to your Cable or VHFfUHF antenna.
ANTENNA
[4l
COMPONENT
IN2
(1 080p/1 080i/
720p/480p/480i)/
R-AUDIO-L
LID
VIDEO IN 1/
This input port can be used as a composite video input (VIDEO I) or as a
COMPONENT
component video input (COMPONENT I ). For composite use. connect the yellow
IN 1
jack to Y for video and use audio L (mono) and R for audio signal. For component
(1080p/1080i/
connec~ion,
use
~.
PB, PR for video signals and also connect the audio L (mono)
720p/480p/480i)/
and R for audlO sIgnal.
R-AUDIO-L
This TV can auto detect and switch between the VIDEO I and COMPONENT I
(MONO)
when VIDEO I or COMPONENT I is connected.
To set to auto detection, press
MENU.
select
Settings,
and then select the
Setup
settings. Select the
Video/Component 1 Selection
option then set to
Auto .
. J
In the case o( 32 and .+0 inch models. the AC power cord is attached to the TV
,~ Manufactured under license frolll Dolby Lahoratories. Dolby and the double-D symbol arc tradcl1larb of DoJb:-
L.ah( lratories.
8