Locating Inputs And Outputs - Sony BRAVIA KDL-52V5100 Operating Instructions Manual

Locating Inputs and Outputs
Rear Panel
[]
[]
[]
Side Panel
{n
o.
[]
SERVICE
This port is to be used when service is required.
[] Thi_inpui p oricanbeu_ed L composiie videoinpui i _iDEo ii orL _omponeni
COMPONENT video input (COMPONENT J ). For composite use, connect the yellow jack to Y/V
IN 1 (1080p1 for video and use audio L and R for audio signal. For component connection, use Y,
1080i/720p/ PB, PR for video signals and also connect the audio L and R for audio signal.
480p/480i)/
If you are using composite video input (VIDEO
1), make sure to select Video 1
under Channel Menu. If you are using component video input (COMPONENT 1),
L-AUDIO-R
make sure to select Component 1 under Channel
Menu.
[] COMPONENT Component video provides better picture quality than the S Video and composite
IN 2 video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for
video formats of 1080p, 1080L 720p, 480p, and 480i as labeled.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
[] AUDIO OUT Connects to the left and right audio input jacks of your audio equipment. You can
(FIX) use these outputs to listen to your TV's audio through your stereo system.
[] HDMI 1Nll21314 HDMi
iHigh_Detiniiion Muiiimedia inierfacei provides an uncompressedl ali:
L-AUDIO-R
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio.
Be sure to use only an HDMI cable that bears the HDMI logo.
If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to any
HDMI IN (with DVI-to-HDMI cable or adapter)j ack, and connect the audio jack to
the AUDIO IN (L/R)jacks below the HDMI IN 1.
(Continued)
7