Locating Inputs And Outputs - Sony Bravia KDL-52VE5 Operating Instructions Manual

Locating Inputs and Outputs
Rear Panel
Item Description
•
V
iJl (I I
(omporWnT
1
rn
SERVICE
[2]
VIDEO IN 11
COMPONENT
IN
1 (1080p/
1080in20p/
480p/480i)/
L-AUDIO-R
~ COMPONENT
IN2
@]
AUDIO OUT
(FIX)
This port is to be used when service is required.
This input port can be used as composite video input (VIDEO 1) or as component
video input (COMPONENT I). For composite use, connect the yellow jack to
YNideo for video and use audio Land R for audio signal. For component
connection, use Y, PB, PR for video signals and also connect the audio Land
R
for
audio signal.
You must configure the input type
if the input is used as composite or
component video input. Otherwise
a black & white or distorted picture
may occur.
To configure the input type, press
MENU, select Channel menu
then select Video/Component 1
to choose Video
1
or
Component 1
as shown here.
Component video provides better picture quality than the S Video and composite
video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for
video formats of 1080p, I080i, nop, 480p, and 480i as labeled.
Audio connection is required for the COMPONENT IN ports, connect audio (UR).
Connects to the left and right audio input jacks of your audio equipment. You can
use these outputs to listen to your TV's audio through your stereo system.
(Continued)
7