Sony BRAVIA KDL-55EX500 Operating Instructions Manual page 54

Condition
BRAVIA Sync
Cannot find connected
BRAVIA
Sync HOM I
device
Second
AN
receiver is not
listed on the
Device List
PC Input
No picture
I
No signal
Poor Picture
General
TV screen feels warm
Wide Mode
changes
automatically
Suddenly the picture gets
smaller
Explanation/Solution
• Make sure that the
Control for HDMI
is set up on both the TV and the
optional device compatible with
BRAVIA
Sync (see page 25).
• Only one A/V receiver may be used with the
BRAVIA
Sync and
Control for HDMI
functions at one time (see page 43).
• Due to the thin profile of this television, the heat generated by the LCD
panel backlight and supporting electronics will be more noticeable. This
is normal operation and not a cause for concern.
• The current
Wide Mode
setting is automatically replaced with the
4:3
Default
setting when you change the channel or video input, if
4:3
Default
in the
Screen
settings is set to other than
Off.
If you want to
lock in
Wide Mode
selected with
WIDE
on the remote control, set
4:3
Default
to
Off
in the
Screen
settings (see page 35).
• Check the
Auto Wide
option in the
Screen
settings (see page 35).
- - -
• The picture gets smaller during the commercials due to the method in
which the provider broadcasts their content. When HO content channels
switch to SO content (commercials), the picture may be small with a
black border.
• Auto Wide
will not expand the picture during these content changes since the
content information is regulated by the channel signal provider. You can
manually change the
Wide Mode
if you prefer (see page 27). This setting
will remain in effect until you change the channel or input or manually change
the
Wide Mode
again.
"Black box" on screen • You have selected a text option and no text is available (see page 41). To
turn off this feature, set the
CC Display
option to
Off.
If you were
trying to select closed captioning, select
CC1
instead of
Text1-4.
- - - - -
54