Using The Screen Settings - Sony BRAVIA KDL-55EX500 Operating Instructions Manual

1+1
Using the Screen Settings
Wide Mode
Auto Wide
Wide Zoom
Normal
Full
Zoom
On
Fills the screen with minimum distortion.
Select to display 4:3 picture in original size when the original source is 4:3.
Select to enlarge the picture horizontally to till the screen when the
uriginal source is 4:3 (Standard definition
SOUl\:ei.
When the original
source is 16:9 (High-de1inition source). select this mode to display the
16:9 picture in its original size.
Select to enlarge the original picture without distorting the aspect ratio.
Select On to automatically change Wide Mode setting hased on the
content.
Off
Off
Full Pixel
Normal
Full
Zoom
If frequent screen changes are disturbing to you, select Off. Choose one
of the Wide Mode options when this function is set to Off.
Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of the
original image as possible.
Select to display the 4:3 picture in its original size.
Select to enlarge the 4:3 picture horizontally only. to fill the display area.
Select to enlarge the picture horizontally and vertically to an equal aspect
ratio that fills the wide screen.
Select to continue using the current Wide Mode setting when the
channel or input is changed.
Displays pictures in their original size when parts of the picture are cut otf
(available depending on the TV model).
+
1
Displays pictures in their original size.
Normal
Displays pictures in their recommended size.
-1
Enlarges the picture so that the edges are outside the visible display area.
Allmvs you to move the position of the picture left and right. (Available in Wide Zoom
and
Zoom.)
Allows you to move the position of the picture up and down. (Available in Wide
Zoom and Zoom.)
Display Area
Horizontal
Center
Vertical Center
4:3 Default
Select the default
Screen Mode to lt.'ie
for 4:3 SOl/rces
• Normal is not available when you are watching a nop, 1080i or 1080p source.
• If 4:3 Default is set to anything but Off, the Wide Mode setting changes only for the current
channel. When you change channels (or inputs), Wide Mode is automatically replaced with the
4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and
inputs are changed, set 4:3 Default to Off.
• 4:3 Default is not available if Auto Wide is set to Off.
(Col/til/ued)
35