Table of Contents
Advertisement
Indicators in the display
Problem
The alarm symbol
; is lit up and the
three sensor
buttons of the wine
storage zones are
flashing in the
control panel. An
audible alarm is
also sounding.
The alarm symbol
; and the sensor
button for one of
the wine storage
zones is flashing
and an audible
alarm also sounds.
The active charcoal
filter change
indicator light —
lights up.
A dash is lit up
up/flashing in the
display.
"F1" to "F3" or "S1"
to "S9" appear.
Possible cause
The door alarm has been
triggered.
The temperature in the
respective wine storage
zone has risen higher or
fallen lower than the
temperature set. This could
be due to:
– the door being opened
too frequently
– a blocked ventilation gap
– there has been a lengthy
interruption of the power
supply.
This is the reminder to
change the active charcoal
filter.
Only temperatures within
the range of the appliance
temperature will be
displayed.
There is a fault.
Frequently asked questions
Solution
^ Close the door. The
sensors and the alarm
symbol ; will go out and
the audible alarm stops.
^ Rectify the cause of the
alarm. The alarm symbol
; goes out and the
sensor for the zone
concerned lights up
constantly.
The audible alarm stops.
^ Replace the active
charcoal filter and then
confirm the filter change in
settings mode (see "Active
charcoal filter").
^ Contact Miele Service.
47
Advertisement
Table of Contents
