Table of Contents
Advertisement
Turning the appliance on and off
Before first use
Protective film
Stainless steel surfaces have a layer of
protective foil to prevent scratching
during transportation.
^ Do not remove the foil until the
appliance has been positioned in its
final location. Start at one of the top
corners.
Cleaning and Care
^ Immediately after removing the
protective foil, treat stainless steel
surfaces with the Miele stainless steel
conditioning agent supplied with the
appliance.
Important! Each application of the
Miele stainless steel conditioner
forms a durable protective film that
is stain and water resistant!
^ Clean the inside of the appliance and
the accessories with lukewarm water
and liquid dish soap and then dry
with a soft cloth.
Operating the appliance
The appliance is operated with the use
of touch keys activated by a finger.
A tone will sound each time a button is
touched. You can deactivate this, if you
wish (see "Selecting additional settings
- Acoustic signals").
14
Turning the appliance on
The electrical supply symbol t will
appear in the display as soon as the
appliance has been turned on at the
main power supply.
^ Touch the On/Off button.
The electrical supply symbol t will
then go out and the appliance will start
to cool.
The sensors for the upper, middle, and
lower wine storage zones will then
appear in the control panel. The
selected zone will be highlighted yellow
and the temperature of the selected
zone will show in the display.
The first time the appliance is turned on
the sensors for the wine storage zones
and the alarm symbol ; will flash until
the selected temperature has been
reached in the zones.
As soon as the set temperature has
been reached, the sensor for the
respective wine storage zone will light
up constantly. the alarm symbol ; will
go out as soon as the set temperatures
have been reached in each zone.
The interior lighting will come on when
the door is opened.
Advertisement
Table of Contents
