Table of Contents
Advertisement
A different setting can be set for each
storage zone.
^ Tap the sensor button for the wine
storage zone for which you want to
adjust the settings.
The selected sensor button is
highlighted in yellow. You can now:
– set the temperature
– turn on the DynaCool function
Please refer to the relevant section in
the manual for more information.
If you then select the other wine storage
zone, the settings for the previously
selected zone will remain unchanged.
Turning the appliance on and off
Turning the appliance off
^ Touch the On/Off button.
If this does not work, the safety lock
0 is activated.
The sensors for the three wine storage
zones will then go out.
The temperature display will go out and
the electrical supply connection symbol
t will appear.
The interior lighting goes out and the
cooling is turned off.
Turning off the appliance in Sabbath
mode
The appliance can be turned off
directly at any time.
^ Touch the On/Off button.
The temperature display will go out and
the electrical supply connection symbol
t will appear in the display.
The interior lighting goes out and the
cooling is turned off.
When the appliance is turned back
on again, Sabbath mode is
deactivated.
15
Advertisement
Table of Contents
