Boss RC-3 Owner's Manual page 17

When Connecting an FS-5U
* The FS-5L cannot be used.
Operation Explanation
While recording/playing/overdubbing, press the
Stop
foot switch to stop.
While stopped, you can press the foot switch
Tempo setting
several times to set the tempo.
To clear the phrase, hold down the foot switch
Clear phrase
for at least two seconds (p. 10).
When Connecting Two FS-5Us or an FS-6
When you operate an FS-5U connected to the white plug
(stereo L side) or pedal B of an FS-6
The operation will be the same as when a single FS-5U is connected.
Connecting to an External Footswitch
When you operate an FS-5U connected to the red plug
(stereo R side) or pedal A of an FS-6
Operation Explanation
When you press the foot switch, the
next-numbered phrase memory will be
selected.
If you press the foot switch during
Memory shift (up)
playback, the newly selected phrase
memory number will blink in the display,
and the phrase memory will be changed
when the currently playing phrase has
ended.
When you hold down the foot switch for at
Memory shift (down) least two seconds, the previous-numbered
phrase memory will be selected.
* If the current phrase has not been saved, that phrase will be
lost when you perform the memory shift. For details on how
to save a phrase, refer to p. 8.
• If you perform the memory shift operation near the end of the
phrase, there may be cases in which the shift-destination phrase
memory will not be selected.
• You can also perform memory shift operations by pressing the
[ ] / [ ] buttons.
17