ResMed AirSence 10 User Manual
  1. Manuals
  2. Brands
  3. ResMed Manuals
  4. Humidifier
  5. AirSence 10
  6. User manual

ResMed AirSence 10 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User guide
English

Advertisement

Table of Contents
loading

Related Manuals for ResMed AirSence 10

Summary of Contents for ResMed AirSence 10

  • Page 1 User guide English...

  • Page 2: Indications For Use

    ™ ™ The AirSense 10 AutoSet and AirSense 10 Elite are ResMed's premium auto-adjusting pressure and Continuous Positive Airway Pressure (CPAP) devices. WARNING  Read this entire guide before using the device.  Use the device according to the intended use provided in this guide.

  • Page 3: About Your Device

      At a glance The AirSense 10 includes the following:  Device  HumidAir humidifier  Air tubing  Power supply unit  Travel bag  SD card (already inserted). Contact your care provider for a range of accessories available for use with the device including: ...

  • Page 4: About The Control Panel

      About the control panel Press to start/stop therapy. Start/Stop button Press and hold for three seconds to enter power save mode. Turn to navigate the menu and press to select an option. Dial Turn to adjust a selected option and press to save your change.
  • Page 5 5. Close the humidifier and insert it into the side of the device. 6. Connect the free end of the air tubing firmly onto the assembled mask. See the mask user guide for detailed information. Recommended masks are available on www.resmed.com.

  • Page 6: Starting Therapy

      Starting therapy 1. Fit your mask. 2. Press Start/Stop or breathe normally if SmartStart is enabled. You will know that therapy is on when the Sleep Report screen is displayed. The current treatment pressure is shown in green. During ramp time the pressure is gradually increasing and you will see a spinning circle.

  • Page 7: Power Save Mode

      Power save mode Your AirSense 10 device records your therapy data. In order to allow it to transmit the data to your care provider, you should not unplug the device. However, you can put it into power save mode to save electricity.

  • Page 8: More Options

      To adjust the Humidity Level: 1. In My Options, turn the dial to highlight Humidity Level and then press the dial. 2. Turn the dial to adjust the humidity level and press the dial to save the change. If you continue to get a dry nose or mouth, or moisture in your mask, consider using ClimateLineAir heated air tubing.

  • Page 9: Caring For Your Device

      Caring for your device It is important that you regularly clean your AirSense 10 device to make sure you receive optimal therapy. The following sections will help you with disassembling, cleaning, checking and reassembling your device. Disassembling 1. Hold the humidifier at the top and bottom, press it gently and pull it away from the device. 2.
  • Page 10   Checking You should regularly check the humidifier, air tubing and the air filter for any damage. 1. Check the humidifier:  Replace it if it is leaking or has become cracked, cloudy or pitted.  Replace it if the seal is cracked or torn. ...

  • Page 11: Data Transmission

      Therapy data Your AirSense 10 device records your therapy data for you and your care provider so they can view and make changes to your therapy if required. The data is recorded and then transferred to your care provider wirelessly or via an SD card. Data transmission Your AirSense 10 device has the capability of wireless communication so that your therapy data can be transmitted to your care provider to improve the quality of your treatment.

  • Page 12: General Troubleshooting

    Troubleshooting If you have any problems, have a look at the following troubleshooting topics. If you are not able to fix the problem, contact your care provider or ResMed. Do not try to open the device. General troubleshooting Problem/possible cause...
  • Page 13   Problem/possible cause Solution I am getting droplets of water on my nose, in the mask and air tubing Humidity level may be set too high. Adjust the Humidity Level. If you have ClimateLineAir heated air tubing, see the ClimateLineAir user guide. My mouth is very dry and uncomfortable Air may be escaping through your mouth.

  • Page 14: Device Messages

      Problem/possible cause Solution Data transfer is not enabled for your device. Contact your care provider to enable the data transfer service. My screen and buttons are flashing Software upgrade is in progress. Software upgrade takes approximately 10 minutes to complete.

  • Page 15: General Warnings And Cautions

     If you notice any unexplained changes in the performance of the device, if it is making unusual sounds, if the device or the power supply are dropped or mishandled, or if the enclosure is broken, discontinue use and contact your care provider or your ResMed Service Center.

  • Page 16: Technical Specifications

     Do not perform any maintenance tasks while the device is in operation. CAUTION  Use only ResMed parts and accessories with the device. Non-ResMed parts may reduce the effectiveness of the treatment and/or damage the device.  Use only vented masks recommended by ResMed or by the prescribing doctor with this device.

  • Page 17: Electromagnetic Compatibility

    2:2007, for residential, commercial and light industry environments. It is recommended that mobile communication devices are kept at least 1 m away from the device. Information regarding the electromagnetic emissions and immunity of this ResMed device can be found on www.resmed.com, on the Products page under Service and Support.

  • Page 18: Humidifier Performance

    Efficiency: >98% for ~7-8 micron dust; >80% for ~0.5 micron dust Aircraft use ResMed confirms that device meets the Federal Aviation Administration (FAA) requirements (RTCA/DO-160, section 21, category M) for all phases of air travel. Wireless module Technology used: 2G GSM It is recommended that the device is a minimum distance of 2 cm from the body during operation.
  • Page 19   Air tubing Air tubing Material Length Inner diameter ClimateLineAir Flexible plastic and electrical components 15 mm SlimLine Flexible plastic 1.8 m 15 mm Standard Flexible plastic 19 mm Heated air tubing temperature cut-out:  41°C Notes:  The manufacturer reserves the right to change these specifications without notice. ...

  • Page 20: Limited Warranty

    ResMed. ResMed recommends that the AirSense 10 device be inspected and serviced by an authorized ResMed Service Centre if there is any sign of wear or concern with device function. Otherwise, service and inspection of the products generally should not be required during their design life.

  • Page 21: Further Information

     Portable diagnostic/screening devices This warranty is only available to the initial consumer. It is not transferable. If the product fails under conditions of normal use, ResMed will repair or replace, at its option, the defective product or any of its components.
  • Page 22 See www.resmed.com for other ResMed locations worldwide. For patent information, see www.resmed.com/ip. Air10, AirSense, AutoSet, ClimateLine, HumidAir and SlimLine are trademarks of ResMed Ltd. AutoSet, SlimLine and ClimateLine are registered in U.S. Patent and Trademark Office. SD Logo is a trademark of SD-3C, LLC. © 2014 ResMed Ltd. 378151/1 2014-07 ResMed.com...

Table of Contents