Quick Start Guide - iConnectivity iConnectAudio 4+ Owner's Manual

Quick Start Guide

+
Your iConnectAUDIO4 is not just a standard audio or MIDI interface. Its audio and MIDI
routing capabilities are far more flexible, and it can be configured for many different
applications.
This Quick Start Guide will help you navigate its features and understand the basics as
simply as possible.
+
BY DEFAULT THE iConnectAUDIO4 COMES CONFIGURED FOR USE WITH A
DAW.
Audio hookup – connecting a Mac, PC, or iOS device
1. Connect a Mac or PC to USB Device Jack 1, using the supplied USB-A to USB-B
cable. *
2. Connect your powered monitors or power amp and speakers to Analog Out Jacks
1&2.
3. Connect the included iConnectivity power supply and plug it into the wall.
*
For the purposes of a sound check, you can substitute an iOS device using the Lightning-to-
iConnectivity cable, and then skip to "Using the Interactive Display" a few paragraphs down
(there is no software to configure). But it's important to install the iConfig software on a
computer (step 2 just below).
v.1.0
7