iConnectivity iConnectAudio 4+ Owner's Manual page 10

If both computer devices are iOS so there's no iConfig software with an Audio Mixer,
use the apps' level controls to balance their relative levels. Otherwise, the second
computer device appears in the Audio Mixer channel strip to the right of the first one;
iConfig is already set up.
Recording audio
1. The four Analog In Jacks on the front panel are routed to the first four inputs of both
computer devices, i.e. to the USB1 and USB2 Device Jacks. DAWs and iOS devices will
see them as available inputs to tracks for recording.
All four combo Analog In jacks accept mics; Inputs 1&2 accept unbalanced Hi-Z
instruments on ¼" plugs; and Inputs 3&4 accept balanced line signals on ¼" TRS plugs.
2. Enable +48V phantom power for condenser mics on any or all four Analog In jacks,
and adjust the input levels. This can be done with the Interactive Display, or in the
iConfig Analog Mixer.
- Here Analog Input channels have are phantom power turned on and their faders have
been raised:
v.1.0
10