Audio Patchbay - iConnectivity iConnectAudio 4+ Owner's Manual

Audio Patchbay

This is a routing matrix with source audio busses across the horizontal axis and
destination busses on the vertical axis. Think of it as "from" (audio sources into the
patchbay) and "to" (destinations).
Available Sources and Destinations: USB1 and USB2 (digital Audio Channels from
the two Device Jacks); Analog (the four Analog Ins and four Analog Outs); the Analog
Mixer (which controls the Analog Ins and Outs); and – only when enabled (see four
paragraphs below) – the USB1 and USB2 mixers.
Operation —There is one simple principle to bear in mind when routing audio in the
+
iConnectAUDIO4 : each Destination bus may have only one Source.
Just as a physical jack doesn't accommodate two plugs, the Audio Patchbay will not
allow connections that make no sense.
v.1.0
23