Rear Panel - iConnectivity iConnectAudio 4+ Owner's Manual

Rear Panel

7 Power Jack
Please use only the supplied iConnectivity 12V/3A (36W) center positive transformer, or
you risk damaging the device.
This adapter operates over a range of 100-240V/50 or 60Hz, so it can be used
internationally with wall plug adapters.
8 USB A Host Jack
This USB 2.0 jack supports up to eight 16-channel MIDI Ports, divided among up to
eight USB MIDI Class-Compliant devices.
Connect, for example, a MIDI keyboard controller via its USB MIDI port instead of using
5-pin DIN cables. Up to 500mA – the USB power standard – is provided, enough to
power a single device. Or connect up to eight USB MIDI devices via a powered USB
hub.
Note: this jack is dedicated to USB MIDI – it's not a standard USB jack.
9 USB 1 Device Jack
Use the included iConnectivity USB-B to USB-A cable to connect the interface to a Mac
or PC computer, or the included iConnectivity USB-B-to-Lightning cable to connect an
iOS device.
This jack supplies 2.1A to charge an iOS device.
10 USB 2 Device Jack
Use the included iConnectivity USB-B to USB-A cable to connect the interface to a Mac
or PC computer, or the included iConnectivity USB-B-to-Lightning cable to connect an
iOS device.
This jack supplies 1A of power to an iOS device - usually enough to keep it charged,
and it may change a smaller iOS device (depending on the size and usage).
11 & 12 MIDI DIN In & Out
These jacks accept 5-pin MIDI DIN plugs for standard MIDI hardware. MIDI is
transmitted at the standard MIDI rate (31.25 Kbps).
v.1.0
18