Device Menu - iConnectivity iConnectAudio 4+ Owner's Manual

Device Menu

Switch Devices – Brings up the Device Selection dialog, allowing you to choose a
different iConnectivity interface to be configured.
All the following have a confirmation dialog so you have a chance to cancel before the
operation:
+
Save Current Settings – Write the current iConfig settings to the iConnectAUDIO4 's
flash memory.
Restore Settings from Memory – Transfers the current snapshot from the
+
iConnectAUDIO4 's flash memory into iConfig.
+
Restore to Factory Defaults – Removes all user changes to the iConnectAUDIO4 's
configuration.
Reset – All digital devices can get "confused" and require resetting.
Reset to Bootloader Mode – When the device restarts it will be in Bootloader Mode,
ready to receive firmware changes. This lets you load specific firmware files.
Upgrade Firmware – Checks whether your firmware is current. If not, it installs it from
www.iConnectivity.com.
Reread Settings – Refreshes the application screen.
v.1.0
21