Midi Channel Remap; Midi Controller Data Filter - iConnectivity iConnectAudio 4+ Owner's Manual

MIDI Channel Remap

For each MIDI port, this matrix is for remapping – changing - entire MIDI channels to
different ones, or just various data types (Pitch Bend, Channel Pressure, etc.).
Remap Type (top left) selects whether to modify the input going to or the output coming
from each port.
+
Port is the familiar list of the16-channel MIDI ports available on the iConnectAUDIO4 :
the USB Device Jacks, USB Host Jack, and 5-pin DIN.
In the screen capture above, incoming MIDI data to USB Device Jack 2 is being
remapped as follows: Pitch Bend data on Channel 3 and Channel Pressure data on
Channel 2 are being changed to Channel 1.

MIDI Controller Data Filter

v.1.0
33