Keyboard And Remote Control Keys - ViewSonic PJ513D-1 Service Manual

3. Keyboard and Remote Control keys

Local Keyboard Description
Key Name Detailed Description
Power Use this button to turn your Data Projector on and off (standby mode).
Source To select input sources as Computer, Video, S-Video, YpbPr
Auto Toggle auto-tracking image function
Left/Blank 1. When user presses the button once, the image would turn to blank and
2. When the image is blank, user press this key back to Normal image; if
3. If there is OSD menu, user can press this key to move to the left item.
Right/Panel Key 1. When user presses the button once, it will enter "Panel key Lock"
2. When panel key is locked, user could press this key for 3 seconds to
3. When there is OSD menu, user can press this key to move to the right
Up/Keystone+ 1. When user presses this button once, it will increase the keystone value.
2. When there is OSD menu, user can press this key to move to upper
Down/Keystone- 1. When user presses this button once, it will decrease the keystone value.
2. When there is OSD menu, user can press this key to move to next item.
Menu/Exit 1. User could press this button to call OSD
2. When it exists OSD, user could press this button to leave current page
Mode/Enter 1. When there is No OSD menu, this button is Mode hot key; user would
2. When there is confirm messages, user could press this key to confirm
ViewSonic Corporation
show "blank" in the right-button screen.
user presses other buttons on keypad or remove, it would release
setting.
release Panel Key Lock( If the panel key lock is active, user still could
use power key to turn on/off the projector)\
item
item.
to main menu or to close OSD.
press this button to choose one of preset modes.
selection.
16
Confidential - Do Not Copy
PJ513D-1