ViewSonic PJ513D-1 Service Manual page 92

4-3 "Blue Edge" Trouble Shooting:
I. Re-adjust "Overfill" first.
For Overfill Re-adjustment:
i. Those 2 Adjustment Screws must be released for around 2 mm first.
ii. Alignment Sequence:
a.To adjust "Horizontal Adjustment Screw" firstly, then "Vertical Adjustment Screw¡¨.
b. Refer to Figure 1-1..
(2) Overfill Vertical
Adjustment Screw
II. Re-assemble LP module—include LP, LP Baffle, LP clip.
ViewSonic Corporation
Fig. 1-1
89
Confidential - Do Not Copy
(1) Overfill Horizontal
Adjustment Screw
PJ513D-1