Specifications - ViewSonic PJ513D-1 Service Manual

2. Specification
1.0 Optical Performance
1.1 ANSI Brightness
1.2 Brightness Uniformity
1.2.1 ANSI Uniformity
1.2.2 Upper-Down unbalance
1.2.3 Left-Right unbalance
1.2.4 JBMA Uniformity
1.3 Contrast Ratio
1.3.1 ANSI Contrast
1.3.2 FOFO Contrast
1.4 Light Leakage
1.4.1 Light Leakage in Active Area
1.4.2 Light Leakage out of Active
Area
1.5 Color
1.5.1 White
1.5.2 Red
1.5.3 Green
1.5.4 Blue
1.6 Color Uniformity
1.6.1 White
1.6.2 Red
1.6.3 Green
1.6.4 Blue
2.0 Image Quality
2.1 Throw Ratio
2.2 Zoom Ratio (tolerance applied)
2.3 Distortion
2.3.1 Keystone Distortion
2.3.2 Vertical TV Distortion
2.3.3 Screen distortion
2.4 Projection Offset
2.5 Focus Range
2.5.1 Visible Range
ViewSonic Corporation
Tested under 60" (diagonal) image size with Wide projection lens position
unless other specified.
Minimum 1600 Lumens
Minimum 55%
0.5~2
0.6~1.67
Minimum 60%
Minimum 150:1
Minimum 1200:1
<0.5 lux compared to center point within 60" (Diagonal at 2.2m, Wide)
image size. Note: This light leakage in Active area is only described as the
spot light with obvious shape. It is not included the uniformity difference of
the projector for black pattern.
<0.65 lux with 54"~80"(Diagonal at 2m, Wide) image size
X
0.312±0.04
0.640±0.04
0.355±0.04
0.141±0.04
X
0.040
0.040
0.040
0.040
54"±5% Diagonal at 2m, Wide
> 1.10 : 1
<1.0%
<1.0%
l W2-W1 l <6mm , l H2 –H1 l <6 mm
120% ±5%
1~8 m
2
Y
0.354±0.04
0.345±0.04
0.548±0.04
0.087±0.04
Y
0.040
0.040
0.040
0.040
Confidential - Do Not Copy
PJ513D-1