Appendix 4 - Keyboard And Remote Control Keys - ViewSonic PJD5122 Service Manual

Appendix 4 --
Local Keyboard Description (Detailed description refer to SW Specification)
3 / BLANK
4 /PANEL KEY
LOCK
▲ / KEYSTONE +
▼ / KEYSTONE -
SOURCE
POWER
AUTO
MODE/ENTER
MENU/EXIT
ViewSonic Corporation
Keyboard and Remote Control keys
1. When user presses the bottom once, the image would turn to blank and show
"BLANK" in the right-bottom of screen
2. When the image is blank, user press this key back to normal image
3. If there is SOD menu, user can press this key to move to the left item
1. When user press the bottom once, it will enter "PANEL KEY LOCK" setting;
2.When panel key is locked, user could press this key for 3 seconds to release
Panel Key Lock
3. When there is OSD menu, user can press this key to move to right item
1. When user presses this bottom once, it will increase the keystone value
2. When there is OSD menu, user can press this key to move to upper item
1. When user presses this bottom once, it will decrease the keystone value
2. When there is OSD menu, user can press this key to move to next item
1. When Quick Auto Search is "on", user press this key to call out Source OSD
and then press ▲▼ to select source. After pressing Enter key, system would
search all signals from selected source and then project first detected source
within 2~3 seconds.
2. When Quick Auto Search is "off", user could press this key to call out Source
OSD to select search source. After pressing "Enter" key, system would keep
searching selected source
1. User presses this key once to turn on projector
2. When projector is on, user should press this key once and show confirm
message; then user should press "Power" key again to turn off projector (LED
would be blink orange)
Auto adjusts the most suitable frequency, phase, for the input source. User
could get the optimal projection quality by pressing the button. Auto-Adjustment
function will not influence the color or brightness setting by users. "Auto" will not
be active under video input, including video, S-video and Y/Pb/Pr. The current
source info will be displayed at the top left of the screen for 3 seconds after
users press Auto
1. When there is no OSD menu, this bottom is Mode hot key; user would press
this bottom to choose one of preset modes
2. When there is confirm message, user could press this key to confirm
1. User could press this bottom to call out OSD
2. When it exits OSD, user could press this bottom to leave current page or
items or to close OSD.
98
Confidential - Do Not Copy
PJD5122