Temporarily Blanking The Screen ... 20 Multifunctional Settings ... 21 Using The Menu Functions ... 21 MAIN Menu ... 22 PICTURE-1 Menu ... 23 PICTURE-2 Menu ... 24 INPUT Menu ... 25 AUTO Menu ... 27 SCREEN Menu ... 28 ViewSonic PJ510...
Page 3
Phenomena That May Easily Be Mistaken For Machine Defects ...39 Warranty And After-Service ...40 Specifications ...41 Customer Support ...42 LIMITED WARRANTY ...43 VIEWSONIC Projector ...43 Appendix ...44 Power Cord Safety Guidelines ...44 Compliance Information for U.S.A..45 Compliance Information for Canada ...45 Compliance Information for European Countries ...45...
DPMS and DDC are trademarks of VESA. PS/2, VGA and XGA are registered trademarks of International Business Machines Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
To avoid penetration of foreign objects, do not put the projector in a case or a bag together with any things except the accessories of the projector, signal cables and connectors. WARNING: Before using this equipment, read this manual thoroughly. Always ensure that the equipment is used safely. ViewSonic PJ510...
Fix the strap to the strap ring of lens cap, as the right drawing. Put one piece of the strap into the groove on rivet, as the right drawing. Push the rivet into the strap hole. ViewSonic PJ510 Projector (Front/Right) Strap ring...
Page 7
LAMP indicator lights or blinks when any problem about the lamp has happened. MENU buttons operate the menu function CONTROL port RGB port Power switch AC inlet ViewSonic PJ510...
In the POSITION mode, To move the picture, use the cursor buttons. ESC button returns to the previous display at the menu functions. ViewSonic PJ510 SEARCH button searches for an input signal between the following signal ports of RGB, VIDEO, S-VIDEO and COMPONENT VIDEO.
Setting Up Arrangement WARNING • Install the projector in a suitable environment according to instructions of the “PJ510 QUICK START GUIDE” and this manual. • The power outlet should be close to the projector and easily accessible. Refer to the illustrations and tables below to determine the screen size and projection distance.
When you release the elevator buttons, the elevator feet will lock position. As necessary, you can also adjust the height of the projector by twisting the elevator feet by hand. ViewSonic PJ510 Elevator buttons Elevator feet...
Connecting Your Devices WARNING Incorrect connecting could result in fire or electrical shock. Whenever attempting to connect other devices to the projector, please thoroughly read the "PJ510 QUICK START GUIDE", this manual and the manual of each device to be connected. CAUTION TURN OFF ALL DEVICES prior to connecting them to the projector.
WARNING • Please use extra caution when connecting the power cord as incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK. Please adhere to the “PJ510 UG – Safety Guide” and the following. • Only plug the power cord into outlets rated for use with the power cord’s specified voltage range.
Align and insert the two AA batteries according to their plus and minus terminals (as indicated in the remote control.). Close the battery cover. Replace the cover in the direction of the arrow and snap it back into place. ViewSonic PJ510...
• Since the remote control uses infrared light to send signals to the projector (Class1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control’s output signal to the projector. Remote sensor approximately 3 meters ViewSonic PJ510...
According to a setup, the projector lamp may light up and the POWER indicator may begin blinking green, without pressing this button. When the power is completely on, the indicator will stop blinking and light green. ViewSonic PJ510 POWER indicator STANDBY/ON button Power switch STANDBY/ON button...
Select the signal you wish to project. Use the zoom ring to adjust the screen size. Use the focus ring to focus the picture. INPUT button RGB button VIDEO button Zoom knob Focus ring ViewSonic PJ510...
Then the POWER indicator will stop blinking and light to solid orange when the lamp cooling is complete. Switch the power switch to [O] (OFF). Power switch (ON position) The POWER indicator will go off. Attach the lens cap. ViewSonic PJ510 POWER indicator STANDBY/ON button Power switch STANDBY/ON button...
As illustrated on the right, a dialog box will appear on the screen indicating that you have muted the sound. Press the VOLUME button to close the dialog box. (Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) ViewSonic PJ510...
(Even if you don't do anything, the dialog box will automatically disappear after a few seconds.) This function is only available for RGB input. NOTE: Position adjustment applies to OSD menu and not the position of the picture. ViewSonic PJ510...
• When the WIDE is selected under the ASPECT item of the MAIN menu, this adjustment is ignored. • The correcting keystone distortions function may not work with some types of input signals. • The adjustable range for correcting keystone distortion will very under all input signals. Operating (continued) ViewSonic PJ510...
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long. Operating (continued) ViewSonic PJ510...
The temporary blank function will automatically finish if any button of the projectior is pressed, if there is a change in the input signal's state and or if the following functions are pressed on the remote control. (STANBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION OR MENU button.) ViewSonic PJ510...
3. Use the ( ), ( ) buttons to select the VOLUME, then press the ( ) or ENTER button. 4. Use the ( ), ( ) buttons to adjust the VOLUME. 5. Press the MENU button to exit. ViewSonic PJ510...
Reset the MAIN Menu Items: Selecting the EXECUTE performs this function. EXECUTE ( )← CANCEL • The items of the MAIN menu are collectively returned to the initial setting. Note that the items WHISPER and LANGUAGE are not reset Description ViewSonic PJ510...
TINT Adjust the Tint: Green ( ) • This is a function for video inputs. This item can’t be selected only at RGB inputs and SCART RGB inputs. ViewSonic PJ510 Description Adjust the Gamma Data: Up ( ) ( ) Down...
Selecting the EXECUTE performs this function. EXECUTE ( ) • The items of the PICTURE-2 menu are collectively returned to the initial setting. Note that the H PHASE item is not reset. Description CANCEL Description ( ) Down ( ) Right CANCEL ViewSonic PJ510...
• NORMAL is the mode for images with a lot of motions like movies, and STILL IMAGE is the mode for images with few motions or completely still ones like slides. • When this function performs, the VIDEO NR function is ineffective ViewSonic PJ510 Description ( ) SCART RGB...
Page 29
EXECUTE ( ) • The items of the INPUT menu are collectively returned to the initial setting. Note that the INFORMATION item is not reset. Description ( ) LOW ( ) TURN OFF ( ) TURN OFF CANCEL ViewSonic PJ510...
Selecting the EXECUTE performs this function. EXECUTE ( ) • The items of the AUTO menu are collectively returned to the initial setting. Note that the item ADJUST is not reset. ViewSonic PJ510 Description ( ) Short (Min. 0 minute =DISABLE) ( ) TURN OFF...
Reset the SCREEN Menu Items: Selecting the EXECUTE performs this function. EXECUTE ( ) • The items of the SCREEN menu are collectively returned to the initial setting.. Description BLACK ( ) TURN OFF ( ) Right ( ) TURN OFF CANCEL ViewSonic PJ510...
Selecting the EXECUTE performs this function. EXECUTE ( ) • The SCREEN TYPE item is returned to the initial setting. Note that the items VOLUME, LAMP TIMER and FILTER TIMER are not reset. ViewSonic PJ510 Description ( ) Low CANCEL...
• Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately. HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE ViewSonic PJ510...
(3) Choose the “LAMP TIME” using the ( )/( ) button, then press and hold the ( ) button of projector or the RESET button of remote control for 3 seconds. (4) Choose the “RESET” using the ( ) button. ViewSonic PJ510 Lamp cover Release button...
Air Filter WARNING • Please carefully read the “PJ510 QUICK START GUIDE”. • Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in. • Use the air filter of the specified type only. (sold separately) •...
(3) Choose the “FILTER TIME” using the ( )/( ) button, then press and hold the ( ) button of projector or the RESET button of remote control for 3 seconds. (4) Choose the “RESET” using the ( ) button. ViewSonic PJ510 Filter cover Release buttons...
Other Care WARNING • Please carefully read the “PJ510 QUICK START GUIDE”. • Before replacing the air filter, make sure the power switch is off and the power cable is not plugged in. ATTENTION • Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.
Note: * Although this message will be automatically disappeared after around 3 minutes, it will be reappeared every time the power is turned ON. ViewSonic PJ510 Description The unit does not display a warning message on the screen when the lamp expires or fails. When the lamp does not light, this indi- cates that the lamp is no longer functional and should be replaced.
Page 39
Hold the release buttons of the air filter, while pulling it down. Wipe the dust-detecting window by using a soft cloth. (Bottom side) Replace the air filter and filter cover. Transparent area Dust-detecting window (Rear side) Filter cover Release buttons Filter cover Release buttons Air filter ViewSonic PJ510...
Turned off Lighting or Blinking in blinking in Turned off ViewSonic PJ510 Description The unit is in a standby state. Please refer to the “Power ON/OFF” sec- tion of this manual. The unit is warming up. Please wait. The unit is in an ON state. Ordinary operations may be performed.
Page 41
“Air Filter” section of this manual. After you have cleaned or changed the lamp, please be sure to reset the filter timer. After the treatment, resent the power to ON. ViewSonic PJ510...
Phenomena That May Easily Be Mistaken For Machine Defects WARNING Please carefully read the “PJ510 QUICK START GUIDE”. Never use the projector if abnormal operations such as smoke, strange odor, excessive sound, damaged casing or elements or cables, penetration of liquids or foreign matter, etc. should occur.
If this does not resolve the problem contact your dealer or service company. They will tell you what warranty condition is applied. Cases not involving a machine defect, and Items to be confirmed ViewSonic PJ510...
VIDEO Input Ports Ports Lamp: PRJ-RLC-008 Optional Parts For others, consult your dealer. NOTE: : : : This specifications are subject to change without notice. ViewSonic PJ510 Specification RGB1 VIDEO ...1 S-VIDEO...1 COMPONENT VIDEO (Y, CB/PB, CR/PR) 1 AUDIO Input Ports AUDIO...
Customer Support For technical support or product service, please contact ViewSonic. NOTE: You will need the product serial number. Country/Region Web site United States viewsonic.com/support Canada viewsonic.com/support United Kingdom viewsoniceurope.com Europe, Middle East, viewsoniceurope.com Baltic countries, and North Africa Australia and New viewsonic.com.au...
How long the warranty is effective: ViewSonic projectors are warranted for three (3) years for all parts excluding the lamp and three (3) years for all labor from the date of the first consumer purchase. Projector lamps are warranted separately.
If you have any questions concerning which proper power cord to use, please consult with the dealer from whom you have purchased the product. Switzerland ...SEV Britain...BASE/BS Japan ...Electric Appliance Control Act Figure 1 Figure 2 Maximum Current Rating of Unit 10 Amps 12 Amps 12 Amps 10 Amps 12 Amps ViewSonic PJ510...
The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/ 31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility,” and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” User Information for all Countries NOTICE: Use the cables which are included with the projector or specified. ViewSonic PJ510...