To connect DLNA DMR (Digital Media Renderer)
If the PC's operating system is Windows 7 or Windows 8 or the DLNA-
certified device (e.g., mobile phone) is connected via a network, you can
play music / videos / photos on projector without installing a separate
program.
1
Configure Projector and PC on the same network. Configure
Windows 7 or Windows 8-installed PC on the network.
2
Right-click the music / video / photo file that you want to play and use
the Remote Playback feature that comes with Windows 7 or
Windows 8.
To play content from a device such as a mobile phone, refer to the
user guide for the device.
3
Content will be played on one device only even if more than one
projector or device is connected. Play speed can vary depending on
network speed.
To connect a DLNA DMP (Digital Media Player)
With a PC having SmartShare™ PC software, music / video / photo files
may be replayed on the projector via home networking.
1
Configure projector and PC on the same network. The projector and
each device should be connected through a single access point to
enable DLNA service.
2
Install SmartShare™ PC software on the PC from the website. Before
installation, close all running programs including firewall and anti-virus
programs.
3
The sever should be running in order to watch the shared file on your
projector.
•
For the website information, go to
SUPPORT → Product/Service Info..
•
For how to use the SmartShare™ PC software, refer to the software
help.
SMARTSHARE
(Home) → SETTINGS →
67