Table of Contents
Advertisement
114
CUSTOMIZING SETTINGS
Menu
Auto Power
High
Altitude
Auto Input
Search
Balloon
Help
Control
Device List
See Avatar
Initial
Setting
Mode
Setting
Makes the projector turn on automatically when the
power code is connected to the projector.
When the power code is connected to
On
the projector, it turns on automatically.
When the power code is connected to
Off
the projector, it goes into standby mode.
If the projector is used at an altitude higher than
1200 meters, turn this on.
Otherwise, the projector may overheat or its protection
function may be activated. If this happens, turn the
projector off and then on again after waiting for several
minutes.
Automatically searches for and displays the input signal
type when it is received. It is available only with external
inputs (HDMI, AV, and Component).
Enables/disables the balloon help.
Displays the list of control devices connected to the
projector.
Turns the Avatar function on or off.
Deletes all optional settings and returns to initial default
mode. Once initialization is complete, the projector will
turn off and on by itself.
•
If Lock System is activated, a pop-up password
prompt will appear.
•
Do not turn off the power during initialization.
Selects Standard or Store. For use at home, select
Standard. Store is a mode used for store display.
Description
Item
Advertisement
Table of Contents
