Table of Contents
Advertisement
54
ENTERTAINMENT
Tips for Network Settings
•
Use a standard LAN cable (Cat5 or higher with RJ45 connector,
10 Base-T or 100 Base TX LAN port).
•
Resetting your modem can cause network connection problems. To
resolve the problem, turn the power off, disconnect and reconnect, and
then turn the power back on.
•
LG Electronics is not responsible for any network connection problems
or any faults, malfunctions and errors caused by an network connection.
•
A network connection may not work properly depending on the Internet
service provider.
•
A DSL modem is required for a DSL service; a cable modem is required
for a cable service. Only a limited number of network connections
may be available, and projector network setting may not be available
depending on your contract with your Internet Service Provider (ISP.)
(If only one device is allowed per line and the PC is already connected,
other devices cannot be used.)
•
Wireless networks can be subject to interference from other devices
operating at a frequency of 2.4 GHz (wireless phones, Bluetooth
devices, or microwave ovens). There may also be interference from
devices with a frequency of 5 GHz, same as other Wi-Fi devices.
•
The surrounding wireless environment can cause the wireless network
service to run slowly.
•
If you do not turn off the entire local home network, network traffic may
occur on some devices.
•
For an AP connection, an access point device that supports wireless
connection is required and the wireless connection feature must
be enabled on the device. Contact your service provider regarding
availability of wireless connection on your access point.
•
Check the SSID and security settings of the AP for AP connection. Refer
to the appropriate documentation for SSID and security settings of the
AP.
•
Invalid settings on network devices (wired/wireless line sharer, hub)
can cause the projector to run slowly or not operate properly. Install
the devices correctly according to the appropriate manual and set the
network.
•
Connection method may differ according to the AP manufacturer.
Advertisement
Table of Contents
